home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tech Arsenal 1
/
Tech Arsenal (Arsenal Computer).ISO
/
tek-17
/
l4mw55.zip
/
README
< prev
Wrap
Text File
|
1993-01-29
|
10KB
|
222 lines
======================================================================
HP LaserJet 4 Printer Driver
for Microsoft Word for MS-DOS
======================================================================
The following information applies to Microsoft Word for MS-DOS(R) version
5.5. For support on Microsoft Word, contact the Microsoft Word for MS-DOS
Support Line at (206) 635-7210.
--------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY |
| ACCOMPANY THIS DOCUMENT (collectively referred to as an |
| Application Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY |
| KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO |
| THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A |
| PARTICULAR PURPOSE. The user assumes the entire risk as to the |
| accuracy and the use of this Application Note. This Application |
| Note may be copied and distributed subject to the following |
| conditions: 1) All text must be copied without modification and |
| all pages must be included; 2) If software is included, all files |
| on the disk(s) must be copied without modification [the MS-DOS |
| utility DISKCOPY is appropriate for this purpose]; 3) All |
| components of this Application Note must be distributed together; |
| and 4) This Application Note may not be distributed for profit. |
| |
| Copyright 1992 Microsoft Corporation. All Rights Reserved. |
| Microsoft and MS-DOS are registered trademarks of the Microsoft |
| Corporation. |
| PostScript is a registered trademark of Adobe Systems, Inc. |
| Hewlett-Packard, HP, and LaserJet are registered trademarks of |
| Hewlett-Packard Company. IBM is a registered trademark of |
| International Business Machines Corporation. Univers is a |
| registered trademark of Linotype AG and its subsidiaries. Arial |
| and Times New Roman are registered trademarks of The Monotype |
| Corporation PLC. |
----------------------------------------------------------------------
This disk contains HP4.PRD, the driver that provides support for the
Hewlett-Packard(R) (HP) LaserJet 4 printer. This printer driver is intended
for use with Microsoft Word version 5.5 for MS-DOS only. Any use of the
included file with any version of Microsoft Word earlier than 5.5 is
untested, and Microsoft does not guarantee the results.
TO INSTALL SUPPORT FOR THE HP LASERJET 4
========================================
1. Insert the enclosed disk in your floppy disk drive.
2. At the MS-DOS command prompt, type the following and press ENTER
copy <drive>:\hp4.prd <path>
where <drive> is your floppy disk drive and <path> is the location
of your Word program directory. For example, if the disk is in
drive A and your Word program directory is on drive C and is called
WORD5, type the following and press ENTER:
copy a:\hp4.prd c:\word5
3. Start Word 5.5. From the File menu, choose Printer Setup. From the
Files list, select HP4.PRD. Choose the OK button.
Word uses POSTSCRP.PRD to support PostScript(R) printing on LaserJet
printers. For more information, see the "PostScript Printers" section in
Chapter 2 of the "Printer Information for Microsoft Word" manual.
MODEL INFORMATION
=================
.PRD Specification: Internal Fonts
----------------------------------
CourierPC 10,12
Courier 6,8,10,12,14
Univers(R) 1-127
Lettergothic 6,8,10,12,14
AntiqueOlv 1-127
UniversCD (condensed) 1-127
Arial(R) 1-127
Albertus 1-127
CG_Omega 1-127
CG_Times 1-127
Times New Roman(R) 1-127
Garamond 1-127
Clarendon 1-127
Coronet 1-127
Marigold 1-127
Symbol 1-127
WingDings 1-127
Word and LaserJet Symbol Sets
-----------------------------
Word creates some special fonts to access additional symbol sets. For
example, the CourierPC font is identical to regular Courier but uses the
PC-8 symbol set to support the line draw feature of Word. Fonts ending in
"Legal," such as PrestigeLegal, are identical to fonts without the suffix,
but use the Legal character set, which includes the copyright symbol,
registered trademark symbol, and others. Fonts ending in "850" use the
IBM(R) PC-850 character set, which includes an expanded set of
international characters.
Word does not always support every symbol set available. You can access
unsupported symbol sets by using the MergePRD program to modify your .PRD
file. For more information, see Chapter 5, "Using the MergePRD Program," of
the "Printer Information for Microsoft Word" manual.
Adding Support for Fonts
------------------------
Word supports most of the LaserJet fonts currently available, but new fonts
frequently appear on the market. You can add support for any new LaserJet
font using the MergePRD program and the Tagged Font Matrix (TFM) files
supplied by the printer manufacturer. The .TFM files for new HP fonts are
stored on the AutoFont Support disk that comes with the fonts. For more
information, see Chapter 5, "Using the MergePRD Program," of the "Printer
Information for Microsoft Word" manual.
Downloading Fonts
-----------------
To use downloadable fonts with the downloading program in Word, you should
place the appropriate .PRD file, a .DAT file with the same filename as the
.PRD file, and the font set files in the same directory (or on the same
floppy disk). The .PRD and .DAT files must be in the same directory. The
.DAT file is automatically copied with the .PRD file when you use Setup to
install your printer driver. For more information on downloading LaserJet
fonts, see Chapter 4, "Downloading Fonts," of the "Printer Information for
Microsoft Word" manual.
Landscape Printing
------------------
The LaserJet 4 can rotate internal fonts to print portrait fonts in
landscape orientation; you do not need a landscape .PRD file to print in
landscape orientation. However, you cannot combine portrait and landscape
formats on the same page.
Autorotation
------------
Font autorotation printing is available on the HP LaserJet 4. The HPGL2
graphics resolution uses the Hewlett-Packard Graphics Language to draw
vector graphics rather than bitmapped images. The HPGL2 resolution can
print most graphics more quickly than the standard bitmapped resolutions,
although it requires more memory. HPGL2 graphics print at 300 dots per inch
(dpi).
Pattern and Shading
-------------------
You can access the font pattern and font shading capability of the HP
LaserJet 4 using the Colors box in the Format Character dialog box. Three
font patterns and Dark, Medium, Light, and White font shading are
available.
Line Drawing
------------
Lines drawn with the line draw feature of Word should be formatted with the
CourierPC or Linedraw fonts to take full advantage of the line draw or
Format Borders features.
Unprintable Regions
-------------------
Like other laser printers, LaserJet printers do not print all the way to
the edge of a page. The area around the edge of a page where the printer
cannot print is called an unprintable region. The sizes of the unprintable
region for the HP LaserJet 4 are included in the "Printer Specifications"
section below.
In Word versions 4.0 and earlier, you have to adjust the margins and page
length settings in the Format Margins command to accommodate unprintable
regions. You do not have to do so in Word version 5.5. You should select
the exact margins and page dimensions you want.
Paper Feed
----------
The Paper Feed box in the File Printer Setup dialog box should normally be
set to Continuous. However, on the LaserJet 4 you can select different
paper trays or an envelope feeder. If you select Mixed, the first page will
feed from bin 1, and succeeding pages will feed from bin 2.
LaserJet Memory
---------------
Printing downloadable fonts and graphics can fill up your printer's memory.
If that happens, the printer will present an error message, and your
document will lose text or print incorrectly. If you're using downloadable
fonts, you can use fewer fonts or smaller font sizes, or you can substitute
cartridge fonts instead. To reduce the amount of memory a graphic requires,
you can print the graphic at a lower resolution or make it smaller. You can
also purchase additional memory for most LaserJet models.
Printer Specifications
----------------------
Font cartridges: One font cartridge slot
Downloadable fonts: Yes
Graphics resolution (dpi): HPGL2, 75, 150, 300
NOTE: Printing with HPGL2 as the graphics resolution in Microsoft
Word 5.5 produces poor results when graphics are printed and
paragraph shading is used. For best results, set the graphics
resolution to 300 dpi in the File Printer Setup dialog box.
Max. num. of fonts per page: Limited only by memory
Memory: 2 megabytes (MB), expandable
to 34 MB for the LaserJet
Unprintable regions (in inches): Top: 0.20, Bottom: 0.20,
Left: 0.25, Right 0.25
Bin support: 100-sheet MP tray (10 envelopes)
250-sheet paper tray
Optional: 500-sheet paper tray
Envelope feeder (75 envelopes)